Product Catalog

  • Manufacturer: Bon Tool
  • Model Number: 24-202-B10

Features a 14-1/2" wide aluminum pin plate with 59 adjustable nickel plated pins. Non-marring tail block. Includes 4 tubing sections for operating length from 34-1/2" to 22 feet. Additional tubing can be added for longer stretches. Sturdy carrying case included.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Manufacturer: Virginia Abrasives
  • SKU: 755374
  • Model Number: 436-51700

Pads Steel Wool #0 17

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705804
  • Model Number: 46196

PNI’s 1” x 18 Ga x 1/4" crown staple is designed for use on a variety of applications including the nailing of 1/ 4” to 1/2” hardwood and engineered flooring. Galvanized to resist corrosion. One pack of 5000 Porta-Nails will nail approximately 800 square feet of 3-1/2” wide flooring using an 6” nailing schedule. For use in Porta Nailer Models 461, 461A and with any Floor Stapler or Underlayment Stapler requiring an 18ga. x 1/4" crown staple. Always refer to the floors installation guidelines for proper fastener schedule. Caution: Do not use in any tool requiring a 20 ga fastener

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705782
  • Model Number: 42640

For the tightest floor possible choose the1-1/2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 3/4” Solid wood flooring on a 3/4"subfloor that is secured to concrete. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470. Caution: Do not use in any tool requir

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 142661
  • Model Number: 42623

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470. Caution: Do not use in any tool requiring an

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 128358
  • Model Number: 41802

PNI’s 1-1/2 In. 18 gauge L Head Flooring nail is for use with PNI’s 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 1-1/2 In. nail is recommended for use with 1/2 In. to 5/8 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. The thinner nail will also reduce the chance of dimpling engineered and thinner hardwood floors. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 1200 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705816
  • Model Number: 470

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 70-90 PSI @ 3.5 cfm. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 705796
  • Model Number: 461

The easy to use 461 Flooring Stapler is the fast and cost effective way to secure 1/ 4” to 1/2” Hardwood and Engineered Wood Flooring. Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461 Stapler uses 1” or 1-1/4” 18 ga x ¼” crown staples .These staples provides superior holding power and prevents de-lamination of engineered flooring. The tool is set for the right angle to ensure your stapler hits the right spot every time. Make sure that you check to insure that the staple is in the correct place and that there is no damage to the prefinished surface. Some floors may require a Stapler with an adjustable base. Always follow the flooring manufacturer’s installation guidelines. The Stapler is shipped with a front end nose accessory that allows you to convert the tool to a conventional stapler for picture frames, upholstery, trim or any application where a stapler will work. Requires 7

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 128359
  • Model Number: 418A

PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.

Please contact us for current pricing and availability.

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 627711
  • Model Number: 402

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

Please contact us for current pricing and availability.

  • Manufacturer: Essex Silver Line
  • Model Number: SL1218R

12" x 18" Orbital Polisher/refinisher allows the DIYer to do the jobs of a rotary polisher with ease!

Please contact us for current pricing and availability.

  • Manufacturer: Essex Silver Line
  • Model Number: SL7

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

Please contact us for current pricing and availability.

  • Model Number: SL8

The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

Please contact us for current pricing and availability.

  • Manufacturer: EDIC
  • Model Number: 3004AD

Exclusive hi-tech design makes it the most versatile, compact and portable air mover in the industry. Heavy-duty polyethylene housing with "granite" look is durable and never looks dirty. Balanced carry-along handle distributes weight evenly for superior portability. Easy to store or stack for transport. Thermally protected motor

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Manufacturer: EDCO
  • Model Number: 79300

8" Gas 9HP Honda scarifier machine. Idea for removing concrete, trip hazards & hard coatings

Please contact us for current pricing and availability.

  • Manufacturer: EDCO
  • Model Number: 50200

Single Disc Floor Grinder 1.5HP-115v-60Hz

Please contact us for current pricing and availability.

  • Manufacturer: Bon Tool
  • Model Number: 12-960

Bull Float is used for smoothing the top surface of non-hardened screeded concrete

Please contact us for current pricing and availability.

  • Manufacturer: Bon Tool
  • SKU: 572683
  • Model Number: 24-202

JR Power Stretcher Kit is for stretching and flatteneing of carpet

Please contact us for current pricing and availability.

  • Manufacturer: Bon Tool
  • SKU: 572703
  • Model Number: 24-215

Heat Iron melts glue for carpet to adhere to

Please contact us for current pricing and availability.

  • Manufacturer: Bon Tool
  • SKU: 572717
  • Model Number: 24-612

Knee Kicker is for stretching and flattening of carpet

Please contact us for current pricing and availability.

  • Model Number: 14-558

Floor Tile Cutter cuts various sizes and shapes of ceramic tile

Please contact us for current pricing and availability.

  • Manufacturer: Bon Tool
  • SKU: 751856
  • Model Number: 14-556

Linoleum Roller is a tool used to flatten, smooth and apply weight when installing adhesive backed linoleum

Please contact us for current pricing and availability.